Smart motorway safety: stopped vehicle detection targets missed, finds regulator

Watch more of our videos on ShotsTV.com 
and on Freeview 262 or Freely 565
Visit Shots! now
‘Urgent’ improvement needed as detection rates and speeds are up to three times worse than National Highways targets

Smart motorway safety targets for detecting stranded vehicles are being missed, a regulator has found.

Hide Ad
Hide Ad

The Office of Rail and Road (ORR) said the performance of stopped vehicle detection (SVD) technology on all-lane running (ALR) smart motorways was “not working as well as it should” and failed to meet the miminum standards set by National Highway. It called for “urgent” improvements to ensure driver safety.

The ORR found that detection rates of stopped vehicles by SVD in National Highways’ five regions with ALR smart motorways is between 59.6% and 79.6%. The company’s target is 80%.

Four out of the five regions are also failing to meet the aim of detecting stopped vehicles in an average of less than 20 seconds. Their averages are between 43 and 65 seconds.

Hide Ad
Hide Ad

The safety of all-lane running motorways has been questioned and in response National Highways embarked on a large-scale project to upgrade stopped vehicle detection and warning systems across the whole smart motorway network. Earlier this year, the company completed the retrofitting of SVD – which uses radars – to all smart motorways without a hard shoulder ahead of schedule.

It has also committed to improving SVD within the next six months and will spend £105 million to replace obsolete technology such as faulty CCTV cameras and message signs over the next two years.

ORR chief executive John Larkinson said: “Our previous work on smart motorway data has shown that these roads are as safe as the motorways they replaced but the number of live lane breakdowns are higher. Having the SVD radar detection equipment in place sooner than planned has helped to reduce the duration of these breakdowns more quickly but it’s not working as well as it should.

Hide Ad
Hide Ad

“While it is still too early to have robust data, it’s clear National Highways needs to urgently improve its performance in this area.”

Shutterstock

Around 10% of England’s motorway network is made up of smart motorways, which are designed to increase road capacity and improve traffic flow by using the hard shoulder as a live lane part or all of the time and using variable speed limits.

ALR roads are the government’s prefered approach and turn the hard shoulder into a permanent traffic lane. There have been long-standing safety fears around them following fatal incidents in which vehicles stopped in live lanes were hit from behind.

Hide Ad
Hide Ad

National Highways chief executive Nick Harris said: “Our roads are among the safest in the world, but every road death is a tragedy and we know there’s more we can do to further improve safety. The report acknowledges the good progress we have made in a number of areas, including completing most of the actions in the smart motorway stocktake action plan.

“It’s right that road users expect high performance standards, that’s why we’re committing £105 million over the next two years to build further resilience into the operational technology to make journeys even safer and more reliable.”

But AA president Edmund King described the findings of the report as “simply unacceptable” and “a major concern for drivers”. He said: “Vulnerable drivers have been left stranded in the most dangerous of places – the live lane of a motorway.

Hide Ad
Hide Ad

“If there are doubts about the technology, then the motorways are not smart and we should revert to tried and tested methods.”

Steve Gooding, director of the RAC Foundation, said: “Whilst it is good news that stopped vehicle detection has been rolled out ahead of schedule, it will remain a concern that it hasn’t yet been fine-tuned to do as much good as it should.”

Related topics:

Comment Guidelines

National World encourages reader discussion on our stories. User feedback, insights and back-and-forth exchanges add a rich layer of context to reporting. Please review our Community Guidelines before commenting.